Contact us

Post code:200436
Mobile: 86-18930968947

MHTF2020 Spiral duct machine

Item Code:SBTF-2020
1.    Slitter / plasma cutting of the tubes to the preset length and required number of pieces.
2.    The cut to length is made by the patented slitter (no noise, no hot sparks created by the saw blade, no leaning of the cut edge). Modern industrial proof computer control.
3.    The electric drive ensures that even by using 2.0 mm strip coil the 2020 continually produces perfect, tight spiral tubes matching or surpassing the standards of DIN, BS, Euronorm and Smacna 
4.    The perfect adapted options for making reinforcement beads, for the production of tendon sheet tubes or the automatic production of notches for the METU flanges, during the production process are further advantages of the tubeformer 2020.
5.    2020 is the only machine for the fastidious costumer.
Technical Data


Diameter range

80 - 2500 mm

Strip thickness

Galvanized Steel       0.4 - 2.0 mm

Stainless Steel         0.4 - 1.2 mm

Aluminium            0.4 - 2.0 mm

Strip width



137 mm          0.4 - 1.0 mm

140 mm           1.1 - 1.3 mm

150 mm          1.4- 2.0 mm

Production Speed

up to 70 m/min

Electrical connection

38KVA/400V/50Hz Other voltage on request

Main drive,El.Motor

Step less controlled by frequency converter


All rights reserved © Shanghai Muhong Mechanical and Electrical Equipment Co.,Ltd.
Post code:200436    Tel/Fax:+86-21-56031255    Mobile: 86-18930968947     E-mail:
Address:Room 311, Yehua Mansion 138 Yangcheng Road, Zhabei District ,Shanghai. China 沪ICP备2021037013号