A. 标准配置
   1.120mm直径焊轮: 1只  
120mm diameter welding wheel: 1 set
   2.90mm 直径焊轮: 1只
     90mm diameter welding wheel: 1 set
   3.制冷系统：1台
     Refrigerating system: 1 set
B. 轮系状态Gear train state:
   1.单轮系(最大焊接板厚：0.6mm)  
     Single gear train(Max welding plate thickness:0.6mm)
   2.双轮系(最大焊接板厚：1.0mm)
     Double gear train(Max welding plate thickness:1.0mm)
C. 功率:40KVA
   Rate of work:40KVA
D. 铜丝直径：   Copper wire diameter: 2.0mm-2.2mm
E. 搭接量  Amount of overlap: 6mm
F. 焊接长度Weld length：80mm-1000mm
G. 焊接直径   part diameter: 100mm-1000mm
H. 焊接板材：冷轧板、镀锌板、镀锡板、不锈钢(>=0.3mm)
             镀铝锌板、镀铝板      
   Weld material: cold-rolled sheet, galvanized sheet,
                 Tin plate, stainless steel(>=0.3mm),
                 
I. 板材厚度：0.3mm-0.6mm；0.3mm-1.0mm
   Thickness of material: 0.3mm-0.6mm；0.3mm-1.0mm
   Welding speed: 3—9m/min (adjustable speed by inverter)